Services

In Services (Figure 7.59) you'll find a list of several services available in IPBRICK. The State column shows you if the service is enabled or disabled. It is possible to restart any service without having to restart IPBRICK.

Figure 7.59: System - Services

In order to restart any service you have to:

• Change the State from Enable to Disable;
• Change the State from Disable to Enable;

The Start column defines the way in which each service has to start with the server (whether after a reboot or after a period while the server was disconnected). If you see Automatic in the Start column of a service then the service will start automatically with the server. On the other hand, if you see Manual on the column then the service will not start with the server. Nevertheless it can be started manually in this menu by changing its State from Disable to Enable.

$\Rightarrow$ Note: Any changes in the Start column of a service will not have immediate effects on the service start. The changed start will only be valid for the next server start. On the other hand, a change in the State column has immediate effects. That is, by changing the service state from Enable to Disable IPBRICK stops this service.