To configure this service you have to click on the Modify link and select Yes to Enable Configuration. The following options are displayed:
Figure 5.2:
Fax Server - FAX at telephony card
|
|
- Main Fax Number: The PSTN Fax number to be present when a FAX is sended;
- Company identification: Company name to be present when a FAX is sended;
- Country Code: Country phone number code to be present when a FAX is sended;
- Area Code: Area phone number code to be present when a FAX is sended;
- Long distance prefix: 0 by default;
- International prefix: 0 by default;
- Rings Before Answer: Number of rings before IPBrick answers to Fax. Can be useful if another FAX equipment is connected. For example, if the FAX equipment can't receive the FAX, IPBrick FAX server can answer at the 5th ring;
- Speaker volume: FAX sound volume;
- Enable delay: Should be active by default;
- Sender of notifications: It's a internal email account that will send notifications to users that are using the Mail2FAX. Examples: Error sending fax, task completed etc. By default we use
IPBrick Fax Server that will use the current domain;
- Sender of received fax notifications: Identification of the reception warnings sender. By default we use
IPBrick Fax Server;
- Attach Original File in the notification: Choose
YES if you wish to attach the file in the notification (by default this option is set to NO)
- Fax resolution: Define the vertical resolution of the fax. There are two resolution modes, a normal resolution of 98 lines/inch and a high resolution of 196 lines/inch;
- Number of attempts to send the fax: Number of tries attempts to send the FAX. By default will terminate a job if 3 consecutive attempts to send a particular page fail;
- Maximum time to send the fax: Sets the time that a fax have to be sent. Stop the process if it does not complete in the indicated time.
To activate configuration, click Modify
If you access the menu again, there will be two new options near the link Modify: Fax Users and Fax Interfaces
Subsections
IPBRICK
