Atcom 530

Because the auto provisioning parameters can't be passed by DHCP in this phone we need to do a inicial configuration at ATCOM phone web interface. The complete steps are:

• If not a new phone reset the configurations by default;
• Go to phone web interface using the defined IP passed by DHCP;
• Go to menu Update - Auto Provisioning and configure that:

       Server address: IPBrick IP
       Username: -
       Password: -
       Config File Name: MAC_ADDRESS.cfg
       Config Encrypt Key: -
       Protocol Type: TFTP
       Update Interval Time: 1 hour
       Update Mode: after reboot
  

• Save config and reboot;