Attendance sequence

Figure 4.35: VoIP - Sequence settings

In this section it is possible to define an answering sequence, or see/ change/ remove the already defined sequences. To add a new sequence it is necessary to click Insert, define a name for the sequence, select if the voicemail is active or not and in Direct Access add the addresses DID/SIP/ANA of the telephones by which the sequence shall be activated.

If you intend to add a Direct Access for an extension defined in IPBrick, it is possible to choose SIP and select the extension in the address. In Sequence is possible to add the telephones which shall ring by the desired order and the time in which each one of them plays till the next one.

Figure 4.36: VoIP - Attendance sequences