IPBrick v4.2.3 - Available updates

IMPORTANT NOTES:
 
  • Before installing an update, always read the information provided with it.
  • It is advised to install updates in the order of release, in order to avoid dependency/conflict problems
  • After installing the updates, always click on "Update Settings". If multiple updates are going to be installed, this can be done after inserting the last update.
  • All installed updates are listed in the IPBrick web interface: Advanced Settings->IPBrick->Update
  • After installing an update all IPBrick configuration backup files (available in the Advanced Settings -> Settings menu) older than the update installation date, will not be usable
  • The reason why the updates don't have a sequential number is due to the existence of specific updates that don't belong yet to the main IPBrick structure. Some of these specific updates are referenced here because they conflict with standard ones.
 
LIST OF UPDATES:
 
  • Download all
    This is a tgz file that contains all the available updates for IPBrick v4.2.3.

 

  • update_01-v4.2.3  [28-08-2007]  (id=000102)
    New voip and fax options:
    - Allows configuration of several analog and ISDN PRI and BRI parameters;
    - New option to enable/disable call transfers and also to define which is the key sequence to transfer
    - Adds sip video support;
    - Upgrades fax service version. Also adds new configuration options.
    - Allows external sip phones to be members of a call group.

    NOTE: Updating settings will hang up all active calls and will deactivate the transfer sequences. These can be enabled again by accessing IPBrick.C > Voip > Registered phones > Options.

 

  • update_02-v4.2.3  [14-09-2007]  (id=000103)
    Various functionalities/fixes
    - Adds support for IPBrick SOHO licences
    - Fixes LDAP user/group functions
    - Adds the possibility to configure the mail from address of IPBrick configurations
    - Adds the possibility to define mail quota warning messages
    - List advanced relay domains alphabetically
    - Correction in firewall rules generation when external interface is PPPoE enabled
    - Fixes the display of special characters in the username field when IPBrick is in slave or client mode
    - Mail2Fax improvements: adds the possibility to define the source fax number of outgoing faxes based in the origin user group
    - Adds the possibility to define which interfaces is the dhcp server listening on
    - Fixes the group samba SID of the following groups: administrator and users
    - Fixes massive import password bug
  • Depends:  update01-v4.2.3

 

  • update_04-v4.2.3  [10-10-2007]  (id=000105)
    System logs improvements:
    - option to enable/disable the server logs
    - option to redirect the logs to a remote server
    - option to enable/disable alerts if the hard disk is almost full. It is also possible to define the email destination address for these alerts.
  • Depends:  update01-v4.2.3, update02-v4.2.3

 

  • update_07-v4.2.3  [11-10-2007]  (id=000108)
    Various functionalities/fixes
    - Improves the mechanism for the massive creation of IPBrick users
    - Solves the problem related with the sending of IPBrick configurations by email, that occured when an USB pen drive was attached to the server
    - Fixes error in webmail configuration menu, where it was impossible to modify the webmail definitions
    - Improves the mechanism to manage groups information
    - Improves the mechanism to manage VPNs information
    - Fixes the translation of MyIPBrick error messages
  • Depends:  update01-v4.2.3, update02-v4.2.3, update04-v4.2.3

 

  • update_13-v4.2.3  [29-10-2007]  (id=000108)
    Various functionalities/fixes
    - Corrections for IPBrick Master/Slave and Master/Client scenarios
    - Start mode automation for the Get Mail from ISP and FAX services
    - DNS machines management improvements
  • Depends:  update01-v4.2.3, update02-v4.2.3, update04-v4.2.3, update07-v4.2.3
    Conflicts:  update03-v4.2.3, update05-v4.2.3, update06-v4.2.3, update08-v4.2.3, update10-v4.2.3, update12-v4.2.3

 

  • update_16-v4.2.3  [29-10-2007]  (id=000108)
    Restore utility for IPBrick application databases
    - Utility to restore databases with information used in IPBrick applications (for example: IPContacts, Calendar, Instant Messaging contacts information, Mail queues, etc.).
  • Depends:  update01-v4.2.3, update02-v4.2.3, update04-v4.2.3, update07-v4.2.3, update013-v4.2.3
    Conflicts:  update03-v4.2.3, update05-v4.2.3, update06-v4.2.3, update08-v4.2.3, update10-v4.2.3, update12-v4.2.3

 

  • update_17-v4.2.3  [29-10-2007]  (id=000108)
    IM improvements
    - IM MSN access control support:
    - Allow MSN communication only with permitted contacts;
    - IM integration with IPBrick Contacts;
    - New firewall capabilities based on string matching;


    This update depends on the package iptables 1.3.5-0.1
  • Depends:  iptables 1.3.5-0.1, update01-v4.2.3, update02-v4.2.3, update04-v4.2.3, update07-v4.2.3, update13-v4.2.3, update16-v4.2.3
    Conflicts:  update03-v4.2.3, update05-v4.2.3, update06-v4.2.3, update08-v4.2.3, update10-v4.2.3, update12-v4.2.3

 

  • update_18-v4.2.3  [29-10-2007]  (id=000108)
    New voip options
    - Adds support to IAX routes;
    - Option to choose allowed codecs and their order, DTMF type, server port and maximum number of simultaneous calls in each route to a sip server;
    - Option to disable voicemail;
    - Option to choose type of data in ISDN calls;
    - Optional IPBrick's ringing generation in routes that don't provide ringing tones;
    - Configurable transmission and receive gains for each ISDN / Analog interface.
  • Depends:  update01-v4.2.3, update02-v4.2.3, update04-v4.2.3, update07-v4.2.3, update13-v4.2.3, update16-v4.2.3, update17-v4.2.3
    Conflicts:  update03-v4.2.3, update05-v4.2.3, update06-v4.2.3, update08-v4.2.3, update10-v4.2.3, update12-v4.2.3

 

  • update_19-v4.2.3  [29-10-2007]  (id=000108)
    DHCP client support for IPBrick public network interfaces
    - Adds the possibility to configure IPBrick public network interfaces to receive an IP address automatically.
  • Depends:  update01-v4.2.3, update02-v4.2.3, update04-v4.2.3, update07-v4.2.3, update13-v4.2.3, update16-v4.2.3, update17-v4.2.3, update18-v4.2.3
    Conflicts:  update05-v4.2.3, update06-v4.2.3, update10-v4.2.3, update12-v4.2.3

 

  • update_20-v4.2.3  [29-10-2007]  (id=000108)
    IPBrick Remote Backup
    - It's now possible to configure the backup of the existing work areas (/home1,/home2,...) to a NAS or RSync server.
  • Depends:  update01-v4.2.3, update02-v4.2.3, update04-v4.2.3, update07-v4.2.3, update13-v4.2.3, update16-v4.2.3, update17-v4.2.3, update18-v4.2.3, update19-v4.2.3
    Conflicts:  update03-v4.2.3, update05-v4.2.3, update06-v4.2.3, update10-v4.2.3, update12-v4.2.3

 

  • update_21-v4.2.3  [29-10-2007]  (id=000108)
    Various improvements/fixes
    - The users system and mail quota is now defined in MBytes
    - Adjustments to mail copy feature
    - Improvements to iPortalDoc integration
    - Corrects firewall rule related with FTP connections
    - Disables DotProject application. From now on, this software is installed through a debian package. The old dotproject database and structure are automatically backuped into the "backup1" share
    - Changes the autovacuum mechanism of the PostgreSQL databases
    - Improvements to the IPBrick API for external applications
  • Depends:  update02-v4.2.3, update04-v4.2.3, update07-v4.2.3, update13-v4.2.3, update16-v4.2.3, update17-v4.2.3, update18-v4.2.3, update19-v4.2.3, update20-v4.2.3
    Conflicts:  update03-v4.2.3, update05-v4.2.3, update09-v4.2.3, update11-v4.2.3

 

  • update_22-v4.2.3  [29-10-2007]  (id=000108)
    Kaspersky configuration improvements
  • IMPORTANT NOTES:
    - This update can only be installed after the installation of kav4proxy version5.5.39.

    Depends:  kav4proxy (>=5.5.39), update02-v4.2.3, update04-v4.2.3, update07-v4.2.3, update13-v4.2.3, update16-v4.2.3, update17-v4.2.3, update18-v4.2.3, update19-v4.2.3, update20-v4.2.3, update21-v4.2.3
    Conflicts:  update03-v4.2.3, update05-v4.2.3, update09-v4.2.3, update11-v4.2.3

 

  • update_23-v4.2.3  [29-10-2007]  (id=000108)
    IPBrick help
    - IPBrick online help in english and portuguese
  • Depends:  update01-v4.2.3, update02-v4.2.3, update04-v4.2.3, update07-v4.2.3, update13-v4.2.3, update16-v4.2.3, update17-v4.2.3, update18-v4.2.3, update19-v4.2.3, update20-v4.2.3, update21-v4.2.3

 

  • Kaspersky Anti Spam version 3.0.278.4  [30-10-2007]  (id=000108)
    New Kaspersky Anti-Spam
    IMPORTANT NOTES:
    - This package can only be installed before update_24-v4.2.3.deb for IPBrick v4.2.3.
    - Also a valid Kaspersky Anti-Spam licence is required.

 

  • update_24-v4.2.3  [30-10-2007]  (id=000108)
    Upgrade to IPBrick v4.3
    - This update upgrades an IPBrick version 4.2.3 to version 4.3

    WARNING:
    - DO NOT INSTALL THIS UPDATE IF YOUR IPBRICK LICENCE IS NO LONGER VALID FOR UPDATES. A NEW LICENCE WILL BE REQUIRED! This can be checked in "Advanced Settings » IPBrick » Web Access".
    If this is the case, first contact us in order to request a licence renovation.

    IMPORTANT NOTES:
    - This update can only be installed after the installation of all released updates for IPBrick version 4.2.3, kav4proxy version5.5.39, kernel-image-2.6.22.10-586-smp and voip-userspace-drivers-IPBrick-4.3.

  • Depends:  ipbrick,kav4proxy (>=5.5.39), kernel-image-2.6.22.10-586-smp, voip-userspace-drivers-IPBrick-4.3, update_01-v4.2.3, update_02-v4.2.3, update_04-v4.2.3, update_07-v4.2.3, update_13-v4.2.3, update_16-v4.2.3, update_17-v4.2.3, update_18-v4.2.3, update_19-v4.2.3, update_20-v4.2.3, update_21-v4.2.3, update_22-v4.2.3, update_23-v4.2.3