Active Directory - Schema SNAP-IN

To enable working in LDAP schema in AD, you must activate the correct MMC Snap-In. This must be done one time per server as follows:

start -> run
    regsvr32 schmmgmt.dll

Figure 1.9: Start - Run

Figure 1.10: Run: 'regsvr32 schmmgmt.dll'

Figure 1.11: 'regsvr32 schmmgmt.dll' succeeded

To access the snap-in, please follow these steps:

1. Start -> Run : mmc

   Figure 1.12: Run: 'mmc'

   

2. File -> Add/Remove Snap-in

   Figure 1.13: File - Add/Remove Snap-in

   

3. Add

   Figure 1.14: Add Snap-in

   

4. Active Directory Schema

   Figure 1.15: Active Directory Schema

   

5. Add
6. Close
7. Ok