IPBbrick.GT connections

At the front of an IPBbrick.GT appliance we find these inputs and outputs:

• 4 - RJ-45 ports (4x Gigabit-Ethernet): The left port is eth0, following to right side for eth1, eth2, eth3;
• 2 - USB 2.0 ports;
• Console port: To connect using the RJ-45 serial extension cable included with the appliance. Windows HyperTerminal can be used with these settings: baud rate 19200, parity none, data bits 8 and stop bits 1;
• Display: A .deb package can be installed at IPBrick to show the ethernet/telephony cards port status;

At the back of an IPBbrick.GT appliance we have:

• 2 PCI slots for telephony cards;
• A power switch;